1-877-477-2202Safety and Presence Detection Mats
Series 12, 14 & 30 have a corrugated surface with a molded ramp edging. Series 15 has a smooth surface with molded blunt edge.
When HD (dual leads) Series Switchmats are being used for machine protection, the Recora Fail-Safe control (FSC-6) provides fail-safe operation against severed leads, transformer failure or power outage.
Construction – Switchmats are completely molded, not laminated – mats resist dirt, oil, weld splatter and most harsh industrial liquids. As with all Recora Switchmats, Series 12, 15 & 30 are active over 95% of their surface areas. Mats are designed for low voltage operation, 12 watts at 24 volts AC or DC. Switch is single pole, single throw, normally open, momentary contact type.
Sensitivity – Standard sensitivity is 10-15 lbs.
Lead Wires – Series 12H, 14H, 15H & 30H leads are single 6′ 18 AWG 2-conductor wire, 300 volt, 7 amp capacity. Series 12HD, 15HD & 30HD have dual leads for connecting to a Fail-Safe Control Unit. 4-conductor lead wires are optional.
Color – Brown is standard for series 12; standard color for series 12, 15 & 30 is black. Other colors are available for series 12, 15 & 30 Switchmats.
Recora Presence Detection Mats / Switchmats®
Series 12H, 14H, 15H & 30H Switchmats have been designed for presence sensing applications for stand alone operator detection in smaller areas. Just place on a smooth surface, connect lead wiring and you’re ready! Depending on how these Switchmats are combined with the machine control wiring, these models can require the operator to step on the Switchmat, or off the Switchmat before the machine will cycle or operate. Series 12H, 15H & 30H are thin (3/8″) versatile Switchmats; perfect coverage when actuating bells, alarms, door signals or safety cut-outs.
Recora Standard Dual Lead Safety Mats
Construction – Switchmats are 3/8″ thick, completely molded in solid vinyl, not laminated, with corrugated surfaces. Mats resist dirt, oil, weld splatter and most harsh industrial liquids. Series 14H are active over 100 % of their surface area. Switchmats are designed for low voltage operation, Class II N.E.C. circuit operation, 100 watts at 24 volts AC or DC. All Recora Switchmats comply with ANSI/RIA standards for robot and machine guarding.
Recora Heavy Duty Safety Mats
The standard in the safety mat industry Recora Series 14HD Industrial Safety Mats provide effective safety barriers to both workers and vehicles entering hazardous or restricted machine and production areas. They can be wired to stop robots, machinery, doors, alarms… most any type of mechanical or moving equipment imaginable. Recora Safety Mats are used in almost any environment, wherever safety and security are paramount. The Extra Heavy Duty series is used in applications that require the mats to withstand heavier equipment used in everyday operations.
Recora Neptune® NF-2 Foot Switch
For actuating machinery, doors and alarms with the touch of a foot.
The Recora Neptune NF-2 Foot Switch is ideal for actuating machinery, doors, and alarms with the touch of a foot, these pliable molded vinyl mats have an overall size of just 6″ x 8″ and are 3/8″ thick.
